Border for a train for children from 0 to 1-2 years. At the side on each side there are additional doors that can be closed, so that the baby does not go anywhere and does not roll off. You can keep open to lie with the child.

The border is made of a very strong backpack mesh and slings. On top are attached to the fastes (plastic latches-Trident). From below it is sewn to the slings, which are also fastened to the fastes. The side doors are attached to the fastes and metal carabiners.

The main load is included on the top mounts that withstand the load up to 40 kg each side of the bottom shelf (both left and right), including on the side shelf.

To mount the side, you need slots between the sleeping shelves and the wall.

Instructions for installing protective sides

Border train "kid"

In the set of protective side for the train "kid" includes the very side with sewn to it bottom slings and top slings. At the same time, the two extreme upper slings have additional fastes, and the two extreme lower slings have half-rings for fastening the door. In the photo below, the model is 90 cm long.

Step 1.Place the side on the shelf sewn to the slings part. And the slings miss in the slots between the shelf and the wall. Zip up the fastes. The tails of the lower sling should be directed down.

Step 2.Secure the top slings on the top shelf so that the tail of the slings looks up. At the extreme slings from below near the wall of the door.

Note:If the free end will be directed not up, but down, the load will have to be on the seam, not on the string. The side will still stand, but the seam is quickly worn out, if you buckle the top string wrong. Maximum load per string/fastess 40 kg.

Step 3.Fasten the side to the upper lines.

Step 4.Close the doors from below on the carabiner, on top of the Fastex.

Installation of the side is complete!