Question: How to Turn On DIY Default Program?

Answer:
1. Press and hold the DIY button the screen will display OFF then press the UP or DOWN button to select ON to activate DIY mode.

2. Press the DIY button again to save, ready to run.

Simulates 24 hours a day of light changes, a gradient orange sunrise, full bright noon, afternoon, sunset and moonlight from bright blue to dark blue, and automatically turns off.

Question: How to Program Customize DIY Mode？

Answer:
1. Press and hold the DIY button to activate the DIY mode.

2. Press the DIY button again to enter setting the screen will display L1 then press UP/DOWN button to set L1 stage at the start and end time press DIY button again to save setting.

3. Press WRGB button to set L1stage the color and brightness press DIY button again to save.

4. Repeat the above operation finish timer of L2/L3/L4/L5/L6/L7.

5. L8 is off by default and cannot be set.

Tip:
1. In DIY mode divide into 8 light time phase, L1~L8 can set each individually time range and customize color and brightness.

2. Each phase will spend 15 minutes fading into the next phase.

Paired with Unique Purple LED Bulbs This light fixtures build-in effective growing four-row LED bulbs，which are consists of purple LEDs + RGB LEDs+ white LEDs integrated for super bright lighting effect and, while providing a 120-degree wide beam angle to illuminate the dark corners of tank.

Remote Control with LCD Display Easy to set the program by the 19-key buttons on the remote. It can easily adjust working mode, color, brightness, time and turn on/off within a range of 32 feet. And display show on the screen simultaneously, let you conveniently to read without touching the light. ( Remote is not waterproof.)

Offer Vary Customizable Options DIY mode:24 hours divided into 8 periods,you can custom time, color and brightness at each period. Day&moon light mode:full spectrum during the day+blue light at night,you can also create your own color bends. Default mode:simulates a 24hour day's natural spectrum,providing a gradual sunrise,bright daylight,gentle sunset and a 4hours moonlight then off for the night. Weather mode:you can choose sunrise,sunset,cloudy and lightning effect add fun to your tank

Full Spectrum Lighting It can be set red, green, blue, purple, orange, cyan and yellow 7 spectrum colors (emit all wavelengths from 380nm to 680nm) and 10 level brightness dimmable options freely adjusted lighting intensity to enough meet different stages of plant lighting needs. Memory Function make the light stay at your last setting when turn on again, no need to reset it.

IP68 Waterproof Brackets Light Multi-size available from 30-120cm. Fits for tank 30-135cm. High-quality aluminum shell improved heat dissipation capability to ensure the light running stable. High light transmission PC lamp cover with prevent water from splashing prolong the life of the lamp beads.

Day Light & Moon Light Mode

Question: How to Turn on Day & Moon Light Default Program?

Answer:
1. Just press the CLOCK button to set the local current time after being out of the box.

2. If the DIY mode is running, it needs to turn off DIY mode, and it will enter the DAY & MOON Light mode.

Question: How to Program Custome DAY & MOON Light Mode?

Answer:
1. Press and hold TIMER button for 3 seconds until of "DAY-L ON" blinks then press UP/DOWN button to set turn on time Press TIMER button again to save.

2. Press WRGB button to set light color and brightness Press TIMER button again to save.

3. Press UP/DOWN button to set turn off time Press TIMER button again to save.

4. Repeat the above operation to finish "MOON-L" mode.

Note
1. In Day & Moon Light mode divide into 2 light time phases, it can set each individual time range and customize color and brightness.

2. At On Time, the light will slowly ramp up over 15 minutes. At the Off Time, the light will slowly ramp down over 15 minutes.

DIY Mode

Question: How to Turn On DIY Default Program?

Answer:
1. Press and hold the DIY button the screen will display OFF then press the UP or DOWN button to select ON to activate DIY mode.

2. Press the DIY button again to save, ready to run.

Simulates 24 hours a day of light changes, a gradient orange sunrise, full bright noon, afternoon, sunset and moonlight from bright blue to dark blue, and automatically turns off.

Question: How to Program Customize DIY Mode？

Answer:
1. Press and hold the DIY button to activate the DIY mode.

2. Press the DIY button again to enter setting the screen will display L1 then press UP/DOWN button to set L1 stage at the start and end time press DIY button again to save setting.

3. Press WRGB button to set L1stage the color and brightness press DIY button again to save.

4. Repeat the above operation finish timer of L2/L3/L4/L5/L6/L7.

5. L8 is off by default and cannot be set.

Tip:
1. In DIY mode divide into 8 light time phase, L1~L8 can set each individually time range and customize color and brightness.

2. Each phase will spend 15 minutes fading into the next phase.